Sp-controls SmartBox+ Installation User Manual download pdf

9/13/200 SP Controls, Inc.

SmartBox Mounting Page 1 of 5

(877) 367-8444

DOCUMENTATION

Use the provided tempate to determine the location of the mounting bolts. We

have provided mounting bolts for sheetrock (the KAP toggles), wood (the LAG

bolts), and masonry (the expansion bolts).

The enclosed Smart Box is fully assembled. Remove the VCR/DVD cover with the

star-point security bit provided. Remove the facia (where the SmartPanel is

installed) by pulling the top towards you. It is held by clips at the top and hinges at

the bottom. Slide the spring hinge pins towards the center. Remove the side

panels by unscrewing the (5) 4-40 screws on each (one is on the bottom of the

unit).

Mount the box to the wall. Install the VCR/DVD player and place the (2) brackets

on the threaded rods. Use the (4) flange nuts provided to tighten the brackets onto

the top of the VCR/DVD.

Route the wires from the VCR/DVD up the sides using the split tubing. Power

should go up one side, video and audio up the other. Use the cable ties and

bases to secure the tubing so that there is a sufficient service loop for the box to

close and open without pinching or straining the cables.

Re-install the VCR/DVD cover, the right and left sides. Re-Install the facia after

you have installed the Smart Panel in it.

If you are using a SP3-AFVP+, it can be mounted to the studs inside the top of the

enclosure with the 4-40 nuts attached to this documentation.

If you have questions, please call us at 877 367 8444 and we would be happy to

walk you through the installation process.

1 2 3 4 5

Summary of Contents

Page 1 - (877) 367-8444

9/13/200 SP Controls, Inc.SmartBox Mounting Page 1 of 5(877) 367-8444SDOCUMENTATIONUse the provided tempate to determine the location of the mounting

Page 2

9/13/200 SP Controls, Inc..SmartBox Mounting (PRELIMINARY) Page 2 of 5(877) 367-8444Install DVD/VCRCOVERINSTALL SIDE COVERSfront screwsINSTALL SIDE CO

Page 3 - Smart Box Wall Preparation

9/13/200 SP Controls, Inc.SmartBox Mounting (PRELIMINARY) Page 3 of 5(877) 367-844420.250in.24.500in.smart box back plate24in.12" centers16"

Page 4 - Applicable ADA Regulations

9/13/200 SP Controls, Inc.SmartBox Mounting (PRELIMINARY) Page 4 of 5(877) 367-844417.7in.24in.27in.4.4 Protruding Objects.4.4.1* General. Objects pro

Page 5

9/13/200 SP Controls, Inc.SmartBox Mounting (PRELIMINARY) Page 5 of 5(877) 367-8444Figure 5bMaximum Forward Reach over an ObstructionThe maximum level

Comments to this Manuals

No comments

Sp-controls SmartBox+ Installation User Manual

Browse online or download User Manual for Audio Sp-controls SmartBox+ Installation. SP Controls SmartBox+ Installation User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Sp-controls SmartBox+ Installation